Application: Basements, roofs of industrial and civil buildings; Subways, tunnels, civil air defense projects and underground municipal works, etc Material: High Density Polyethylene, Creep-type Rubber Modified Asphalt, Silicone Oil Release Liner Film Length: 10m/20m/30m/customization Width: 1m/1.5m/customization Thickness:1.5mm/2.0mm/customization Color: Black Warranty: 5 year After-sale Service: Online technical support Project Solution Capability: Total solution for projects
| Material Introduction |
The reaction-bonded strong cross-laminated film polymer waterproofing membrane is made by coating a layer of
rubber asphalt self-adhesive material with creep resistance on the upper surface or both upper and lower surfaces
of the strong cross-laminated film, then covering with a silicone oil anti-stick release film. This product is a perfect
combination of fast reaction bonding technology and excellent-performance strong cross-laminated film.
| Technical Specifications |
Physical Properties | Indicator | |||
Type H | Type E | |||
Tensile Property | Tensile Strength (N/50mm) | Longitudinal ≥ | 300 | 200 |
Transverse ≥ | 300 | 200 | ||
Elongation at Maximum Tensile Strength % | Longitudinal ≥ | 50 | 180 | |
Transverse ≥ | 50 | 180 | ||
Tear Strength /N | Longitudinal ≥ | 20 | 25 | |
Transverse ≥ | 20 | 25 | ||
Heat Resistance | 70℃, 2h: No flowing, dripping or sliding ≤ 2mm | |||
Low Temperature Flexibility /℃ | -20 | |||
No cracking | ||||
Water Impermeability | No water penetration at 0.3MPa for 120min | |||
Peel Strength Between Membranes (Lap Edge), N/mm ≥ | 1.0 | |||
Oil Penetration /Sheets ≤ | 2 | |||
Tack Holding Time /min ≥ | 30 | |||
Peel Strength After Immersion in Cement Mortar, N/mm ≥ | 1.5 | |||
Dimensional Change Rate, % | ±1.0 | ±1.5 | ||
Thermal Stability | No blistering or flowing; maximum edge curling of polymer film or reinforcement not exceeding 1/4 of side length | |||
| Application |
(1) Waterproofing works for basements, roofs of industrial and civil buildings;
(2) Waterproofing and anti-seepage for subways, tunnels, civil air defense projects and underground municipal works;
(3) Waterproofing works for greening on garage roofs, roof gardens, etc.
| Storage and Transportation |
1. The membrane shall be stored in a dry and ventilated environment, protected from sun and rain.
2. When stored horizontally, the stacking height shall not exceed 5 layers; when stored vertically, it shall be stacked in
a single layer.
3. The storage temperature shall not exceed 45℃.
| Company Profile |
Backed by premium product quality, our brand has built an outstanding reputation throughout the global waterproofing
industry. We boast a complete sales and service network covering the whole of China, alongside full accreditations of
ISO 9001, ISO 14001, ISO 45001 and other certifications. We have successfully won bids for a vast number of large-scale
domestic construction projects.
Over recent years, we have accelerated our global market expansion. Our waterproofing solutions are exported to Southeast
Asia, North America and European regions, receiving consistent positive feedback from all our clients. We are committed to
providing high-performance waterproofing solutions for global construction projects.
We supply a comprehensive range of waterproofing materials and membranes to fulfill diversified market demands. Our
flagship specialized products are listed as follows:
1. Modified Bitumen Membranes
2. Self-adhesive Waterproof Membranes
3. Reaction-bonded Waterproof Membranes
4. Polymer Waterproof Membranes
5. Waterproof Coatings
6. Anti-corrosion & Thermal Insulation Materials
Contact: Fay
Phone: 86-17261398503
Tel: 00852-82283663
Email: sale@szwaterpf.com
Add: Beside National Highway 106, Sunjiawan Town, Liling City, Hunan Province, China
We chat
